Tree Spade Extir Plants B350
Discover our most flexible Tree Spade Extir Plants
Discover our most flexible Tree Spade Extir Plants
Machine Description
The Extir-Plants B350 has 3 spades that descend almost vertically into the ground and 2 lateral lances who to cut the taproot of the plant descending down into the ground in an arc. They cross on the taproot working as a pair of scissors.
The B350 realizes a truncated cone clods ranging from a minimum of cm.25/30 of superior diameter to a maximum of cm.45.
Being the clods as truncated cone, with every set of spades it’s possible to obtain clods shallower and then a diameter slightly inferior (es: the superior diameter of 27 cm applied in 25 cm in depth obtains a diameter superior of about 25 cm).
It has also been significantly reinforced to meet the needs of nursery-men operating in difficult terrain (like in Spain and in Sicily).
It can be done, with the use of only the lateral lances, very large clods (cm 120/150) in the shape of a half sphere. Of course we must be able to turn around the plant and plunge the lances 3/4 times in the soil. It’s suitable for shrubs, hedge plants and small trees.
Extir Plants B350 Technical Sheet
Extir-Plants | B350 |
Machine dimensions: | |
– width (mm) | 1.400 |
– length (mm) | 1.300 |
– heigth (mm) | 2.100 |
Weigth (kg) | 600 |
Spades number | 3 |
Side lances number | 2 |
Functioning (without vibrations) | hydraulic |
Working pressure (bar) | 150 |
Tractor power (HP) min-max | 35-80 |
Truncated cone clod’s standard size: | |
– upper width (mm) | 240-400-450 |
– lower width (mm) | 220-300 |
– heigth (mm) | 400 |
Maximum weigth that can be moved (kg) | 200 |
Average amount of time for one work cycle (sec) | 40 |
Get in Touch with us!
Extir plants B350 photogallery