Best Tree Spade for Successful Transplantation: how?

In this article we’ll see how to obtain a successful transplantation: it’s needed the best Tree Spade.

best tree spade for successful transplantation

Only the best tree spade could make efficient perform out of digging, moving and transplanting trees, but they have to be used in proper type and size to accomplish the job successfully. To pick the proper and best tree spade attachment for the application, it is important that operators should know what kind of blades to use of on a tree spade, what size of machine is required, and what are the necessary to set-up for the loader.

Kinds of tree spade’s blades

There are mainly three varieties of tree spade blades configurations: cone, truncated and half moon. The type of tree spade blade to be used will depend on what the contractor is attempting to achieve and the kind of soil in which the spade would operate.

Cone blades

The cone blade can function in the widest variety of soils – sandy to hard-packed soils – but it is definitely the excellent choice in sandy soils because it minimizes the amount of soil that spills away in the roots. It produces almost pointed and narrow bottom root balls with the sides of 30 degrees. Cone blade’s root balls cannot remain standing as balls made by other blades. Because of this, cone blade tree spades are greatest for moving a tree from one location to another. Cone blade can work in a nursery as an effective pruning tool for roots for the steepness of its angle.

Truncated blades

Truncated blades dig most effective in clay-type, heavy soils. They are the widest blades so they’ll make it hard when penetreting the ground. These blades also make the root ball with a compact shape in weight distribution. Truncated blades lop off the bottom in the cone-shaped hole that the spade digs to create a pot-shaped root-ball and make it fit for a pot or burlap bag to be displayed and stored in a vertical position. These blades are of 22 degrees. Truncated blade is a very good choice when working in tight tree-rows on a nursery, simply because it can get to where it requires working without doing damage nearby trees within the row.

Half moon blades

The half moon blades can be used only throug vibrations and they’ll produce an half sphere clod that will need a special pot to maintain a vertical position. It retain a big soil’s amount in the clod, leaving the root system alone, if accordingly big due to the vibrations. The soil’s type cannot be to many sandy, because the vibration will make te clod non steady and cannot be too rocky always due to the vibrations (in particular the the gears that make te blade vibrate).

The 1:10 ratio

There is an easy rule to utilize when figuring out what size of tree spade to use to dig and transplant a tree. Multiply the diameter of the tree trunk by 10 to obtain the size of the tree spade’s clod needed. For example, a tree with a trunk diameter of 9 cm requires a 90 cm clod.

A crucial thing to bear in mind in regards to the 1-to-10 ratio is where to measure the diameter on the tree trunk. The diameter really should be measured 15 cm up the trunk from ground level. Trees with diameters larger than 10 cm must be measured 30 cm up the trunk from ground level. Normally, a measure onemeter from the ground level is good enough.

Set up of compact loader with your Tree Spade

Prior to operating a compact loader with a tree spade, the machine must be adequately equipped to carry and use the attachment. Rear stabilizers need to be employed when operating a tree spade attachment on a compact loader. The loader is raised off the ground by the rear stabilizers. This transfers the weight towards the front exactly where it is needed to maximize the digging functionality of the tree spade. It also helps to maximize the diameter of the root ball of the digging tree. This weight transfer is very useful when the condition of the soil is difficult.

When mounted on an excavator it is sufficient to use the stabilizer bar. If you use a traditional tractor it would be useful to install a support foot near the tree spade to avoid dampening on the tires. If you use a tree spade already mounted on a specific vehicle, obviously everything will already be set up.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *